Please note! Before using the String light, the solar panel must be fully charged using a micro USB-C cable. It takes 13 hours to fully charge the solar panel. Charging the solar panel improves the product's lifespan.
Want to add more atmosphere to your garden, patio or balcony, but don't have a power outlet nearby? Then look no further. This solar string light runs on 100% solar energy, so no wiring is required. The lights have a trendy look similar to the old familiar incandescent bulb. A classic model with a modern twist.
The string has a high-quality solar panel of no less than 10 watts. This allows it to quickly capture a lot of sunlight. The slim design with larger battery capacity allows the lights to burn longer. Is it a cloudy day? Then you can also charge the panel with a USB-C cable. The solar panel has a built-in light sensor, so the light automatically turns on in the dark. There is also a handy on/off switch in case you don't want any light in the garden in the evening. In addition, there is an automatic timer in the Solar panel, which ensures that the lighting switches off after 8 hours of use. The light string can be set to 4 different modes: standard, flashing light, fast flashing light and double flashing light. You can also set the light intensity to 2 different settings: full brightness (15 hours of light) or low brightness (18 hours of light). See the Manual for More information.
A solar lamp needs light during the day to charge so that it can shine in the evening. The more hours of sunshine the Solar panel receives, the better the Battery is charged to release energy in the form of light in the dark. Has the lamp been able to capture little or no light on a cloudy day? Then the Battery will be less charged. As a result, the lamp may burn for less time or not give off any light at all. In winter, the sun will not always be strong enough for Solar products to charge properly. The solar string lights will therefore burn longer in summer and shorter in winter. Not only the sun, but also the angle at which the sun shines on the solar panel is important. The more perpendicular the angle, the better the battery will charge. Cleaning the solar panel regularly will extend the life and burning time of your solar lamp.
Before use, fully charge the battery of a solar lamp with a micro USB-C cable. This solar string light has an on/off switch. Set the switch to 'off' and connect the panel to the micro USB-C cable. Allow the panel to charge for at least 13 hours so that the battery has a chance to fully charge. You can then turn the switch to 'on' and enjoy your Solar lighting in the evening.
The light colour of lamps is expressed in a specific Kelvin value. These filament lamps have a colour temperature of 2200 Kelvin, which is 'extra' warm white. It is similar to the colour of candlelight and gives off a warm, atmospheric light.
The lamps have a sturdy polycarbonate cover. The LED lamps have a long lifespan. In the unlikely event that a lamp breaks, you can easily replace it.
