Looking for a ceiling light with an emergency function? This ceiling light with emergency function has a modern design and is suitable for halls, corridors and buildings. With a maximum wattage of 15 watts, the lamp provides sufficient light. Place several flush ceiling lights next to each other if you want to illuminate a large space or long corridor.
The flush ceiling light has an emergency function of 3 hours and a switchover time of less than 2 seconds. The flush ceiling light also has a sensor with a range of 10 metres. You can set the range within which the lamp switches on when movement is detected. You can set the range to 10 metres, 7.5 metres, or 5 metres. The sensor function can also be switched off. The hold time, i.e. how long the light stays on when movement is detected, is also adjustable. You can set the hold time to: 5 seconds, 30 seconds, 1 minute, 5 minutes, 10 minutes, 20 minutes or 30 minutes. There is space at the back of the light to make an opening for the electrical cables. This makes it easy to connect the electricity. You can then attach the flush ceiling lights to the junction box.
See the Manual for more information about setting up the sensor.
You can choose between a light colour of 3000K (Warm white) to 6000K (daylight). The ceiling light has a diameter of 30.56 cm and a height of 6.82 cm and is made of polycarbonate. Curious about another version of this ceiling light? Then take a look at the ceiling light without sensor . With this lamp, you can bring practical lighting into your home.
